|
11 Aug 2006 - American Institute of Physics
The Sharpest object yet made is a tungsten needle
tapering down to about the thickness of single atom.
The needle, made by postdoc Moh'd Rezeq in the group of
Robert Wolkow at the University of Alberta and the
National Institute for Nanotechnology, starts out much
blunter. Exposed to a pure nitrogen atmosphere, however,
a rapid slimming begins. To start with the tungsten is
chemically very reactive and the nitrogen roughens the
tungsten surface. But at the tip, where the electric
field created by applying a voltage to the tungsten is
at its maximum, N2 molecules are driven away. This
process reaches an equilibrium condition in which the
point is very sharp. (For a single picture, go to
Physics News Graphics; for a movie showing the
evaporation process all the way down to a single atom at
the tip, see the
Wolkow Lab Web site.)
Furthermore, what N2 is present near the tip helps to
stabilize the tungsten against further chemical
degradation. Indeed, the resultant needle is stable up
to temperatures of 900 degrees Celsius even after 24
hours of exposure to air.
The probe tips used in scanning tunneling microscopes (STMs),
even though they produce atomic-resolution pictures of
atoms sitting on the top layer of a solid material, are
not themselves atomically thin. Rather their radius of
curvature at the bottom is typically 10 nm or more.
Wolkow (rwolkow@ualberta.ca) says that although a
narrower tip will be useful in the construction of STM
arrays (you can pack more tips into a small area; and a
wide array might even permit movies of atomic motions)
the spatial resolution won't improve thereby. The real
benefit of the sharp tungsten tips, he believes, will be
as superb electron emitters. Being so slender, they
would emit electrons in a bright, narrow, stable stream.
###
|
| |
26 Jun 2006 - New Wave in Tungsten Carbide Wedding Rings
(PR Newswire)
Hip, young, men are increasingly choosing alternative
metals for their jewelry. While their fathers wear 14kt
gold or the more expensive platinum, the Generation
X'ers are gravitating in large numbers to tungsten
carbide, titanium, carbon fiber, and stainless steel.
|
| |
24 Jan 06 - Tungsten sulphide nanotubes
show their strength
(nanotechweb.org)
Researchers at the Weizmann Institute of Science,
Israel, and the Technical University of Dresden in
Germany have found that certain tungsten sulphide
nanotubes were as strong as theory predicts for
structures without defects. The tubes had a tensile
strength of around 16 GPa.
|
|
|
05 Jan 06 - Primary Metals Inc. Announces Sale of Interest in
Peruvian Tungsten Mine
(CCN)
Primary Metals Inc. ("Primary") (TSX VENTURE:PMI) is
pleased to announce the completion of a sale of its
option and interests in Minera Malaga Santolalla S.A.
("Malaga") to Dynacor Mines Inc. in consideration of the
payment of US$650,000, which has now been received.
|
|
|
 |
Customer
Testimonials |
 |
"ATI Alldyne Spray Dried (SD) grade powders
improved drilling insert manufacturing and field
performance. Alldyne provided the technical support during
the conversion from conventional preblended to SD grade mix
powders. Alldyne's resident engineers provided technical
information on various characteristics including powder flow
properties, shrinkage, Scott density and pellet
distribution. Alldyne also developed a PC based software for
press planning new parts.
SD grade mix enhanced over all
manufacturing processes, from consistently filling the mold
cavity to sintering characteristics. Alldyne's specialists
visited our site on an as needed basis and helped optimize
our production facility. Alldyne's grade powder experts were
always available to troubleshoot problems or improve the
grade mix.
Alldyne's Grade Powder improved manufacturing efficiency,
reduced cycle time & scrap rate, increased product
reproducibility and contributed to superior product
performance. We experienced less tool breakage, and rework
providing more resources to produce highest quality inserts
for oils and gas drilling industry. "
Anil Kumar,
Senior Staff
Hard Materials Engineer
Reed Hycalog
http://www.reedhycalog.com
|
| |
"Using Alldyne's graded powders has made Michigan Carbide a
more successful and profitable company. With on-site visits
from both engineering and sales, Alldyne has provided
tremendous support, and has helped us achieve a level of
quality that is equal if not superior to our competitors.
There has never been a problem with delivery, and I have
always had clear and open communications.
From failure
analysis that is fast, and accurate, to technical support on
a regular basis, Alldyne's graded powder has saved our
company the headaches of on-site blending and spraying,
allowing us to focus on providing the best possible products
and service to our customers."
Richard Kosky,
General Manager,
Michigan Carbide
http://www.michigancarbide.com
|
|